#include <IRremote.h> IRrecv irrecv(11); // Receiver on pin 11 decode_results results; void setup() Serial.begin(9600); irrecv.enableIRIn();
For a complete code library or model-specific dump (e.g., SGH-24, SGC-18C), further empirical capture is required, as the address byte (byte 1) may differ across production batches. Technical Analysis Unit Data sources: Open source IRDB (Infrared Database), LIRC project, and empirical testing on Super General SGH-09 model. Disclaimer: This document is for educational purposes only. The author is not affiliated with Super General. super general ac remote code
#include <IRremote.h> IRsend irsend(3); // IR LED on pin 3 void sendSuperGeneral(uint8_t bytes[8]) uint16_t rawData[200]; int idx = 0; // Lead code rawData[idx++] = 9000; rawData[idx++] = 4500; // For each bit of 64 bits (LSB first per byte) for (int byteIdx = 0; byteIdx < 8; byteIdx++) for (int bit = 0; bit < 8; bit++) rawData[idx++] = 560; if ((bytes[byteIdx] >> bit) & 1) rawData[idx++] = 1690; else rawData[idx++] = 565; #include <IRremote
void loop() if (irrecv.decode(&results)) // For Super General, use raw buffer (results.rawbuf) Serial.print("Raw (len="); Serial.print(results.rawlen); Serial.print("): "); for (int i=0; i<results.rawlen; i++) Serial.print(results.rawbuf[i] * MICROS_PER_TICK, DEC); Serial.print(" "); The author is not affiliated with Super General
Serial.println(); irrecv.resume();